Setting the Number of Copies and Printing Order
The procedure for specifying the number of copies and printing order is as follows:
1. Open the printer driver setup window1.
2.
Specify the number of copies to be printed
2.
For Copies on the Layout tab, specify the number of copies to be printed.
3.
Specify the print order
3.
Check the Print from Last Page check box when you want to print from the last page in order, and
uncheck the check box when you want to print from the first page.
Check the Collate check box when you are printing two or more copies, and want to print them in
groups, and uncheck the check box when you want to print them as a group on the same page.
Note
•
Depending on the model you are using, the Collate setting may be unavailable.
4.
Complete the setup
4.
Click OK.
When you execute print, the specified number of copies will be printed with the specified printing order.
Important
• When the application software that you used to create the document has the same function, specify
the settings on the printer driver. However, if the print results are not acceptable, specify the function
settings on the application software. When you specify the number of copies and the printing order with
both the application software and this printer driver, the number of copies may be multiplied numbers of
the two settings or the specified printing order may not be enabled.
92
To Next Page
Loading...
Need help?
General
Weight and Dimensions
