EasyManuals Logo

Canon imagePROGRAF TM-240 Online Manual

Canon imagePROGRAF TM-240
962 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #677 background imageLoading...
Page #677 background image
Cannot Connect Printer to Network
Check 1
Is the Ethernet cable connected correctly to the printer's wired LAN connector?
Make sure the printer is connected to the network with the correct Ethernet cable, and then turn the printer on.
For instructions on connecting the cable, refer to the Setup Guide.
Check 2
Make sure the Link indicator is lit.
The left and right indicators are lit if the printer is connected via 1000Base-T.
The left indicator is green if the printer is connected via 100Base-TX, and the right indicator is orange if
connected via 10Base-T.
If the Link indicator is not lit, check the following points.
The hub is on.
The end of the Ethernet cable is connected correctly.
Insert the Ethernet cable until it clicks and locks in place.
There is no problem with the Ethernet cable.
If there is any problem, replace the Ethernet cable.
677

Table of Contents

Other manuals for Canon imagePROGRAF TM-240

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF TM-240 and is the answer not in the manual?

Canon imagePROGRAF TM-240 Specifications

General IconGeneral
ColorYes
Printing colorsPigment black, Pigment cyan, Pigment magenta, Pigment matte black, Pigment yellow
Print technologyInkjet
Maximum resolution2400 x 1200 DPI
Print head nozzles15360
Number of print cartridges5
Page description languagesCALS G4, HP-GL/2, HP-RTL, JPEG
Media thickness0.07 - 0.8 mm
Print margin roll20 mm
Maximum print sizeA1 (594 x 841 mm)
Maximum roll width610 mm
Maximum roll length18 m
Maximum roll diameter150 mm
Paper tray media typesCut sheet, Roll
Print margin cut-sheet20, 31, 3 mm
Borderless printing media sizesA1, A2, A3, A3+, B2, B4
USB connectorUSB Type-B
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile printing technologiesApple AirPrint
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.1 W
Power consumption (sleep)2.2 W
Power consumption (typical)59 W
Operating temperature (T-T)15 - 30 °C
Operating relative humidity (H-H)10 - 80 %
Sustainability certificatesCE, UKCA
Control typeTouch
Product colorBlack, Grey
Display diagonal4.3 \
Sound pressure level (standby)35 dB
Sound pressure level (printing)39 dB
Mac operating systems supportedMac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey, Mac OS X 13.0 Ventura
Windows operating systems supportedWindows 10, Windows 11, Windows 7, Windows 8.1
Weight and Dimensions IconWeight and Dimensions
Depth748 mm
Width978 mm
Height439 mm

Related product manuals