Maintenance
This item is displayed by selecting (Setup) on the HOME screen.
• Nozzle Check•
Prints out the nozzle check pattern.
Checking for Nozzle Clogging
• Print Head Cleaning•
Select this to clean the print head.
Cleaning the Print Head
• Print Head Alignment•
Adjusts the alignment of print head.
Automatic Adjustment to Straighten Lines and Colors
Manual Adjustment to Straighten Lines and Colors
• Print head angle adjustment•
Adjusts the print head angle.
Adjusting Line Misalignment
• Paper feed adjustment•
Sets the paper feed amount.
◦ Set priority◦
Sets the method of adjusting the paper feed amount.
▪ Auto▪
Prioritize print quality or Prioritize length accuracy is automatically selected depending on
the settings in the printer driver selected for printing.
▪ Prioritize print quality▪
Adjusts the print quality to make the horizontal streaks of the print less noticeable. The setting
for Adjust print quality is applied. When Paper feed fine adjustment is executed, the setting
for Paper feed fine adjustment is applied in addition to the setting for Adjust print quality.
▪ Prioritize length accuracy▪
Adjusts the length of the ruled lines on the printed piece to match. The values for Change
adjustment values under Adjust feed length are applied.
◦ Adjust print quality◦
Select this when the printed material has different colored horizontal streaks.
Automatically Adjusting Different Colored Horizontal Streaks
Manually Adjusting Different Colored Horizontal Streaks
369
To Next Page
Loading...
Need help?
General
Weight and Dimensions
