Enlarge/Reduce (Scaling) and Auto rotation
When both Enlarge/Reduce (Scaling) and Auto rotation are specified, Enlarge/Reduce (Scaling) is done
first and then Auto rotation is done to determine if printing is possible.
Printing is done without Auto rotation if the size of the image after doing Enlarge/Reduce (Scaling) would
cause the image to run off the edge of the paper were Auto rotation executed.
Enlarge/Reduce (Scaling) AND Auto rotation EXAMPLE
Print data (image drawing range)
• Printed image with Enlarge/Reduce (Scaling) only.•
• Printed image when the image runs off the edge of paper.•
Auto rotation is not performed.
431
To Next Page
Loading...
