Automatically Adjusting Different Colored Horizontal Streaks
If printed images are affected by banding in different colors across the sheet, execute Adjust print quality
for automatic adjustment of the paper feed amount.
The printer prints and reads a test pattern for automatic adjustment of the feed amount.
Important
• When using highly transparent media, use manual adjustment.•
Manually Adjusting Different Colored Horizontal Streaks
Note
• We recommend executing the adjustment if you have changed the paper type or paper size.
• Always check the Set priority values.•
Paper feed adjustment
• If additional fine-tuning is necessary, execute Paper feed fine adjustment.•
Fine-Tuning Paper Feed Amount
• Use Adjust feed length to ensure that lines in CAD drawings are printed at exactly the right length.•
Adjusting Line Length
• This may take some time, depending on the type of paper.
Items to Prepare
When Using Rolls
An unused roll at least 254.0 mm (10.00 in.) wide
When Using Sheets
One sheet of unused paper of at least A4/Letter size
Follow the procedure below to adjust.
1. Load paper.1.
Loading Rolls in the Printer
Loading Sheets in the Printer
2.
Select (Setup) on HOME screen.
2.
3.
Select Maintenance.
3.
4.
Select Paper feed adjustment.
4.
5.
Select Adjust print quality.
5.
6.
Select Auto.
6.
558
To Next Page
Loading...
