Canon imagePROGRAF TM-240 Online Manual

Detect image size and Oversize
Operation is as described below when both Detect image size and Oversize are specified.
TM-355/TM-255/TM-5355/TM-5255
• When OFF or Command priority is selected for Detect image size and Disable is selected for•
Oversize:
Oversize is disabled in accordance with the command-specified image drawing range.
Margins are added within the command-specified image drawing range.
Depending on the layout, part of the image may be cut off.
• When OFF or Command priority is selected for Detect image size and Enable is selected for•
Oversize:
Oversize is enabled in accordance with the command-specified image drawing range.
Margins are added outside the command-specified image drawing range.
The image is not cut off by the margins.
However, you will need to print on paper of a size that is greater than the size of the image drawing
range specified by the HP-GL/2 data plus the top, bottom, left, and right margins.
• When Detected size is selected for Detect image size and Disable is selected for Oversize:•
Oversize is disabled and processing of the detected minimum image range is performed.
Margins are added within the detected minimum image range and parts of the image are cut off.
• When Detected size is selected for Detect image size and Enable is selected for Oversize:•
Oversize is enabled and processing of the detected minimum image range is performed.
Margins are added outside the detected minimum image range.
The image is not cut off by the margins.
Detect image size AND Oversize EXAMPLE
The example below shows printing of data in which a figure is located in the upper left corner
with margins below and to the right, on roll paper that is larger than the command-specified image
drawing range (size normally specified by the application).
A. Command-specified image drawing range (when OFF or Command priority is selected for Detect
image size)
B. Minimum image range detected (when Detected size is selected for Detect image size)
439

Canon imagePROGRAF TM-240 Specifications

General

Color	Yes
Printing colors	Pigment black, Pigment cyan, Pigment magenta, Pigment matte black, Pigment yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Print head nozzles	15360
Number of print cartridges	5
Page description languages	CALS G4, HP-GL/2, HP-RTL, JPEG
Media thickness	0.07 - 0.8 mm
Print margin roll	20 mm
Maximum print size	A1 (594 x 841 mm)
Maximum roll width	610 mm
Maximum roll length	18 m
Maximum roll diameter	150 mm
Paper tray media types	Cut sheet, Roll
Print margin cut-sheet	20, 31, 3 mm
Borderless printing media sizes	A1, A2, A3, A3+, B2, B4
USB connector	USB Type-B
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.1 W
Power consumption (sleep)	2.2 W
Power consumption (typical)	59 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	CE, UKCA
Control type	Touch
Product color	Black, Grey
Display diagonal	4.3 \
Sound pressure level (standby)	35 dB
Sound pressure level (printing)	39 dB
Mac operating systems supported	Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey, Mac OS X 13.0 Ventura
Windows operating systems supported	Windows 10, Windows 11, Windows 7, Windows 8.1

Weight and Dimensions

Depth	748 mm
Width	978 mm
Height	439 mm