Adjusting Colors with the Printer Driver
To use printer driver matching when printing, turn on the printer driver's color correction function. Printer
driver matching accurately applies the characteristics of data displayed on the monitor and allows you to
obtain print results of impressions that are close to those displayed on the monitor.
Important
• When printing using printer driver matching, Canon recommends that you set the monitor and the
environment light as follows:
Monitor
Color temperature: D50 (5000K)
Brightness: 100 to 120cd/m2
Gamma: 2.2
Environment light
Fluorescent light for D50 color evaluation (color temperature 5000K, high color rendering
properties)
Brightness when looking at printed materials: 500 lx ± 125 lx
Note
• When printing from an application software that can identify ICC profiles and allows you to specify them,
use a printing ICC profile in the application software, and select settings for color management.
The procedure for adjusting colors with the printer driver is as follows:
1. Open the printer driver setup window1.
2. Select advanced settings2.
From the Main tab pull-down menu, select Advanced Settings.
114
To Next Page
Loading...
