Color mode
Lets you specify the color(s) to use when printing HP-GL/2 data.
Display this item by selecting the following.
(Setup) > Printer settings > Print settings > HP-GL/2 print settings > Print quality settings
• Color (perceptual)•
◦ If you select Line drawing for Print target:◦
Reproduces colors of general images naturally and features smooth gradation. In addition, selecting
this setting allows you to adjust colors easily using an application software.
◦ If you select Photo for Print target:◦
Reproduces colors of general photos naturally and features smooth gradation. In addition, selecting
this setting allows you to adjust colors easily using an application software.
• Color (saturation)•
◦ If you select Line drawing for Print target:◦
Prints in easy-to-see colors suitable for line drawing.
◦ If you select Photo for Print target:◦
Reproduces vivid colors on data such as a poster.
• Color (correct off)•
Performs printing without color matching.
• Monochrome•
◦ If you select Line drawing for Print target:◦
Select this setting to print a line drawing using black ink.
◦ If you select Photo for Print target:◦
Prints color data converting to monochrome. Continuous tones are reproduced using gray halftones.
• Monochrome BMP•
The colors other than white are printed in black.
380
To Next Page
Loading...
