Selecting Enable allows you to print over a network using the IPP protocol.
▪ Security Print▪
Set to Enable to print using the security print function with the IPP protocol, for example with
AirPrint.
◦ Wi-Fi DRX settings◦
Selecting Enable allows you to activate discontinuous reception when using Wi-Fi.
◦ Wired LAN DRX settings◦
Selecting Enable allows you to activate discontinuous reception when the printer is connected to a
device compatible with wired LAN.
◦ Reset SSL certificates◦
Initializes SSL certificate information.
◦ Reset LAN settings◦
Initializes the network settings on the printer.
After resetting, perform setup again as necessary.
354
To Next Page
Loading...
