EasyManuals Logo

Canon imagePROGRAF TM-240 Online Manual

Canon imagePROGRAF TM-240
962 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #457 background imageLoading...
Page #457 background image
Selecting Enable HTTPS redirection redirects the communication using CHMP to encrypted
communication.
Note
To use CHMP for encrypted communication, you need to register the printer's root certificate to
your computer.
Registering Printer's Root Certificate to Local Computer for SSL Communication
CHMP is a Canon proprietary protocol.
Network interface settings
To connect to a hub that supports spanning tree, select Spanning tree settings > Enable.
Selecting Enable avoids circulating data on a network.
DRX settings
When enabled, data is received intermittently during network connection.
IP filtering
Allows or denies access for specific IP addresses.
Settings for both IPv4 and IPv6 addresses can be specified.
Important
If the device address for the administrator has been set to rejection by mistake, select
(Network) on the HOME screen of the operation panel, and then select LAN settings > Wi-Fi /
Wireless Direct / Wired LAN > Settings > Advanced > Reset LAN settings in this order, and
initialize network information of the printer.
After resetting, perform setup again as necessary.
MAC address filtering settings
Allows or denies access for specific MAC addresses.
Important
If the device address for the administrator has been set to rejection by mistake, select
(Network) on the HOME screen of the operation panel, and then select LAN settings > Wi-Fi /
Wireless Direct / Wired LAN > Settings > Advanced > Reset LAN settings in this order, and
initialize network information of the printer.
After resetting, perform setup again as necessary.
Reset LAN settings
Initializes the network settings on the printer.
After resetting, perform setup again as necessary.
457

Table of Contents

Other manuals for Canon imagePROGRAF TM-240

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF TM-240 and is the answer not in the manual?

Canon imagePROGRAF TM-240 Specifications

General IconGeneral
ColorYes
Printing colorsPigment black, Pigment cyan, Pigment magenta, Pigment matte black, Pigment yellow
Print technologyInkjet
Maximum resolution2400 x 1200 DPI
Print head nozzles15360
Number of print cartridges5
Page description languagesCALS G4, HP-GL/2, HP-RTL, JPEG
Media thickness0.07 - 0.8 mm
Print margin roll20 mm
Maximum print sizeA1 (594 x 841 mm)
Maximum roll width610 mm
Maximum roll length18 m
Maximum roll diameter150 mm
Paper tray media typesCut sheet, Roll
Print margin cut-sheet20, 31, 3 mm
Borderless printing media sizesA1, A2, A3, A3+, B2, B4
USB connectorUSB Type-B
Ethernet LAN data rates10, 100, 1000 Mbit/s
Mobile printing technologiesApple AirPrint
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.1 W
Power consumption (sleep)2.2 W
Power consumption (typical)59 W
Operating temperature (T-T)15 - 30 °C
Operating relative humidity (H-H)10 - 80 %
Sustainability certificatesCE, UKCA
Control typeTouch
Product colorBlack, Grey
Display diagonal4.3 \
Sound pressure level (standby)35 dB
Sound pressure level (printing)39 dB
Mac operating systems supportedMac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey, Mac OS X 13.0 Ventura
Windows operating systems supportedWindows 10, Windows 11, Windows 7, Windows 8.1
Weight and Dimensions IconWeight and Dimensions
Depth748 mm
Width978 mm
Height439 mm

Related product manuals