2130
Cause
The roll paper width set in the print job is not the same as the width of the roll paper in the printer.
What to Do
Tap OK on the touch screen to go to the next screen.
Check the media type and size that appear and tap OK.
• Stopping printing•
Tap Cancel or Stop on the touch screen.
• Replacing the roll paper•
Follow the steps below to replace the paper with roll paper of the width set in the printer driver.
1. Tap Replace the paper and print, then remove the roll paper.1.
Removing the Roll from the Printer
2. Replace the paper with paper of the width set in the printer driver.2.
Loading Rolls in the Printer
Printing begins.
• Printing without changes•
Tap Print with the loaded paper..
However, note that this error may cause paper jams and affect the printing quality.
Note
• To change print settings in Windows, select Fit Roll Paper Width in the printer driver and set the roll
paper width in the dialog box that appears.
• To change print settings in macOS, open the printer driver and select Fit Roll Paper Width, and then
set the roll paper width in that panel to the width of the paper loaded in the printer.
• To suppress this message, set Detect paper setting mismatch in the touch screen menu to Do not•
detect. However, note that this error may affect the printing quality.
Menu Structure
821
To Next Page
Loading...
