Canon LaserBase MF5600 - Removing the Left Cover; Removing the NCU Board and Modular Board; Removing the NCU Case; Removing the Reader Left

Chapter 3
3-23
3.1.14.4 Removing the Reader
Left Front Cover
0002-7500
1) Open the platen glass cover [1].
2) Open the front cover [2] and the ADF part [3],
remove one screw [4], and remove the reader left
front cover [5].
F-3-94
3.1.14.5 Removing the Left
Cover
0002-7501
1) Remove the two screws [1] on the back side.
F-3-95
2) Remove the front screw [1] and then remove the
claw [2].
3) Slightly lift up the left side of the unit and remove
the cover as if you were opening the bottom side of
the left cover [3].
F-3-96
3.1.14.6 Removing the NCU
Board and Modular Board
0005-9913
1) Remove the two connectors [1] and the flat cable
[2].
2) Remove the four screws [3] and remove the NCU
board [4] and modular board [5].
F-3-97
[1]
[5]
[4]
[3]
[2]
[1]
[1]
[3]
[2]
[1]
[4]
[3]
[3]
[2]
[5]
[3]