IPv4 subnet mask XXX. XXX. XXX. XXX
IPv4 default gateway XXX. XXX. XXX. XXX
IPv6 link-local address XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
MAC address (Wired LAN) XX:XX:XX:XX:XX:XX
Printer name XXXXXXXXXXXXXXX
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
("XX" represents alphanumeric characters.)
• Enable/disable Wired LAN•
Enables/disables wired LAN.
• Advanced•
For details on each setting item:
Advanced setup
Advanced setup
• Set printer name•
Specifies the printer name. You can use up to 15 characters for the name.
Note
• You cannot use the same printer name as that already used for other LAN connected devices.•
• You cannot use a hyphen for the initial or last character of the printer name.•
• TCP/IP settings•
Performs IPv4 or IPv6 setting.
• WSD settings•
Setting items when you use WSD (one of the network protocols supported in Windows).
â—¦ Enable/disable WSDâ—¦
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in•
Windows.
â—¦ Optimize inbound WSDâ—¦
Selecting Enable allows you to receive the WSD printing data faster.
â—¦ WSD scan from this printerâ—¦
187
To Next Page
Loading...
Need help?
General