Carrier TruVu VAVB3-E2 - Wiring Devices to the TV-VAVB3-E2 S Rnet Port

Wiring devices to the TV-VAVB3-E2's Rnet port
TruVu™ VAVB3-E2 CARRIER CORPORATION ©2022
Installation and Start-up Guide All rights reserved
23
You can wire the following devices to the TV-VAVB3-E2's Rnet port in a daisy-chain configuration:
• ZS sensors
• Wireless Adapter that communicates with wireless sensors
• Equipment Touch
• TruVu™ ET Display
See the device's Installation and Start-up Guide for complete wiring instructions.
NOTES
• ZS sensors, a Wireless Adapter, and an Equipment Touch can share the same Rnet.
• The Rnet communicates at a rate of 115.2 kbps.
Wiring devices to the TV-VAVB3-E2's Rnet port