Case 580SR+ - Page 468

116 SECTION 25 - FRONT AXLES
Assembly
Remove the gear (5) and the shim (4).
Remove the shaft (8), the gears (7) and the spheri-
cal washers (6).
Remove the gear (12) and the shim (13).
Apply a thin layer of Molicote G-n plus paste on the
half housings of differential (3) and (9).
SWARNING
Remove rests of dope.
4
5
F27440
6
7
6
7
8
F27441
12
13
F27442
3 9
F27443
www.maskinisten.net
Copyright ©