Case 580SR+ - Page 552

60 SECTION 27 - REAR AXLE
Assembly
Remove the shaft (13), the gears (14) and the
spherical washers (15).
Remove the gear (12) and the shim (11).
Apply a thin layer of Molicote G-n plus paste on the
half housings of differential (8) and (9).
SWARNING
Remove rests of dope.
Apply a thin layer of Molicote G-n plus on the gears
(12) and (16) and on the gears (14).
15
14
15
14
13
F28060
12
11
F28061
8 9
F28079
12
14
14
16
F28063
www.maskinisten.net
Copyright ©