Case Communications 6401 Rugged ADSL Router Manual – Rev 1.5
SECTION 5 – ADVANCED CONFIGURATION Page 5.17
Network Address Translation Settings
Network Address Translation (NAT) allows you to share one Wide Area Network (WAN) IP address
for multiple computers on your Local Area Network (LAN).
NB. Configure the Routing Default Gateway and DNS Server as per PPPoA
Make sure that the settings below match the settings provided by your ISP.
5.2.2.5 CONFIGURING BRIDGING – (layer 2 EOA)
There is very little configuration for Bridging, its only necessary to select an interface and provide it
with a name, then the summary configuration table will be displayed as shown below.
Enter Service Description (example br_0_0_35)
To Next Page
Loading...
