Case Communications 6401 Rugged ADSL Router Manual – Rev 1.5
SECTION 5 – ADVANCED CONFIGURATION Page 5.29
5.5.3 NAT – DMZ HOST.
The Case Communications 6401 Rugged Router will forward IP packets from the WAN that do not
belong to any of the applications configured in the Virtual Servers table to a DMZ host computer.
Enter the computer's IP address and click 'Apply' to activate the DMZ host.
Clear the IP address field and click 'Apply' to deactivate the DMZ host.
DMZ Host IP Address: Enter the IP Address of your DMX host
To add a new DMZ Host:
You can enter the computer's IP address and then click Save/Apply to activate the DMZ host
you set on this page.
Note:
DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must have
its DHCP client function disabled and should have a new static IP Address assigned to it because its
IP Address may change while using the DHCP function.
To Next Page
Loading...
