Case 6401 - Security Log

Case Communications 6401 Rugged ADSL Router Manual – Rev 1.5
SECTION 7 - MANAGEMENT Page 7.3
7.3 SECURITY LOG
MANAGEMENT > SECURITY
The security Log dialog allows you to view the Security Log and configure the Security Log options
Click “View” to view the Security Log
Click “Reset” to clear and reset the Security Log
Right Click here to save the Security Log.
Security Log
Click “View” to view the Security Log
Click “Reset” to clear and reset the Security Log
Right Click here to save the Security Log.
Reset
View
7.4 SNMP AGENT
MANAGEMENT > SNMP
This page allows configuration of the Routers SNMP parameters.
SNMP - Configuration
Simple Network Management Protocol (SNMP) allows a management application to retrieve statistics
and status from the SNMP agent in this device.
Select the desired values and click "Apply" to configure the SNMP options.
SNMP Agent
X
Enable
Disable
Read Community
Public
Set Community
Private
System Name
Case_6401
System Location
Unit_12
Enter Freeform Name
System Contact
John_Smith
Enter Freeform Name
Trap Manager IP
Enter IP Address of SNMP / Network Management System
Save / Apply