Case Communications 6401 Rugged ADSL Router Manual – Rev 1.5
SECTION 5 – ADVANCED CONFIGURATION Page 5.56
5.13 DNS Proxy
ADVANCED SETUP > DNS PROXY
The Domain Name Service is a system designed to allow the identification of
Internet servers to be based on names rather than IP addresses. Because Internet
communication is based on IP addresses, all names must be translated into an IP
address.
The 6401 Rugged Router has a built-in DNS proxy that can take DNS queries
from devices on the local network and forward them to the 6401 Router, which in
turn asks the DNS Servers provided by the ISP.
By default the DNS Proxy is enabled and 6401 Router will forward all requests to
the servers detected by the operating system (usually assigned by your ISP).
Alternatively you can choose to forward DNS queries to specified servers.
On entering the option the following page is displayed.
Select DNS Proxy Configuration – Configure a specific server.
Host name of the Broadband Router – Enter the name of this router
Domain Name of the LAN Network – Enter the Domain name of the Local Network
6401 Rugged Router
x DNS Proxy Configuration
Host Name of the Broadband Router
Domain Name of the LAN Network
WAN Service
VPN
LAN
NAT
Security
Parental Control
Quality of Service
Routing
DNS
DSL
UPnp
DNS Proxy
Layer 2 Interface
Advanced Setp
To Next Page
Loading...
