OPERATION & MAINTENANCE MANUAL STE35SR
Foreword
The Operator's Manual is used for safety guidelines and the correct use and maintenance of the
machine. The operation and maintenance steps described are the most effective methods for
operation and maintenance. Following these instructions helps to ensure the effectiveness,
economy and reliability of equipment maintenance. Careful reading of the relevant contents of
"NOTICE" and "WARNING" in the driver's manual will minimize the risk of casualties and machine
damage or unsafe factors caused by improper maintenance.
Before starting and operating the machine for the first time, and before repairing the
machine, you should read the instructions carefully and understand thoroughly.
Read the safety messages and safety labels given in this manual carefully so that they should
be understood fully.
This manual should always be placed next to the machine for easy reference, if the manual is
lost, damaged or illegible should be replaced (immediately request a new manual to CFG
INDUSTRIAL Ltd.or your CFG distributor to obtain a new copy.
When you sell the machine, make sure that this manual should be provided to the new owner
together with the machine.
NOTICE
This manual is applicable to STE35SR.
This manual has been adapted to all markets. Optional and special equipment from different
markets should be ignored because they may not be suitable for your machine.
We reserve the right to modify and improve technical data, specifications, design, operation
and maintenance instructions of the product without prior notice.
Due to the unpredictable operation and maintenance of various conditions that may contain
potential hazards. Therefore, this manual and the safety information on the machine will not
include all possible safety measures. If you use methods or actions not specifically
recommended or permitted in this manual, you are responsible for taking necessary
measures to ensure safety.
Unauthorized modification or abuse of the machine may affect the performance of the
excavator or cause greater safety risks. Please drive and use the machine with caution.
Disoperation and misuse may also cause damage.
Application range of standard machine: altitude below 2000m, atmospheric temperature -20℃
~40℃.
The location of the Operator's Manual
Storage location for the Operator’s Manual:
magazine box on the back of operator’s seat.
In addition to this manual, please refer to the
instruction manual of the engine for details on the
use, maintenance, and troubleshooting of the
engine.
In the book where the requirements for the safety of
people, machine and important technology in place,
all have symbol prompts and●, please bear in
mind.
To Next Page
Loading...