OPERATION & MAINTENANCE MANUAL STE35SR
Adjustment
Adjust the operator's seat, control box and rear view mirror before starting each operation or
when the operators change shift.
Adjust the operator's seat so control levers and switches can be operated freely and easily
with the operator's back against the backrest.
Seat Adjustment
IMPORTANCE
In order to obtain the best possible comfort, it is important to adjust the seat in the correct way.
Statement: Assemble different types of seats and seat adjustment methods are different, please
operate according to the actual situation.
(1) Weight adjustment
According to the operator's own weight, rotate the weight adjustment handle, adjust to the
appropriate position. There are three levels of adjustment gears.
(2) Fore-and-aft adjustment
Lift up the seat lever to adjust the entire seat forward or backward. The maximum seat adjustment
is 75mm. (This adjustment is the adjustment of the seat rod itself, does not include the adjustment
of the slide plate)
(3) Backrest angle adjustment
The seat back can be adjusted forward or backward by a total of 15°.
(4) Seat belt
Before fitting the seat belt, check that there is no problem in the belt mount bracket or
mounting belt. If it is worn or damaged, replace the seat belt.
Even if no problem can be seen in the belt, replace the seat belt every 2 years.
To adjust seat before operation.
Always wear the seat belt during operations.
Fit the seat belt so that it is not twisted.
To Next Page
Loading...