OPERATION & MAINTENANCE MANUAL STE35SR
Do not leave the operator's seat when there
is a raised load.
Do not pull pile.
Safety Maintenance Information
Warning Tag
Always attach the "DO NOT OPERATE" warning tag to the work equipment control lever.
Attach additional warning tags around the machine if necessary.
Keep this warning tag in the tool box while it
is not used. If there is not the tool box, keep
the tag in the operation manual pocket.
If others start the engine, or touch or operate
the work equipment control lever while you
are performing service or maintenance, you
could suffer serious injury or property
damage.
Keep Work Place Clean and Tidy
Choose a flat and solid place.
Choose a place where there is no danger of
landslides, falling rocks or being flooded.
Make the working device and the bulldozer fully contact the ground.
Appoint Leader When Working with Others
When repairing the machine or when removing and installing the work equipment, appoint a leader
and follow his instructions during the operation.
When working with other people, if the meaning is conveyed incorrectly between the workers, it
will cause accidents.
To Next Page
Loading...