OPERATION & MAINTENANCE MANUAL STE35SR
Basic Safety Information
Safety Rules
Only trained and authorized personnel can operate and maintain the machine.
Follow all safety rules, precautions and instructions when operating or performing
maintenance on the machine.
Do not operate the machine if you are in poor physical condition and mental instability, under
the influence of drugs (easily drowsy) or alcohol.
When working with another operator or configuring a signal person, be sure that all personnel
understand all hand signals that are to be used.
If Problems Are Found
If you find any problems in the machine during operation or maintenance (noise, vibration, smell,
incorrect gauges, smoke, oil leakage, etc., or any abnormal display on the warning devices or
monitor), report to the person in charge and have the necessary action taken. Do not operate the
machine until the problem has been corrected.
Working Wear and Personal Protective Items
Do not wear loose clothing and accessories. There
is a hazard that they may catch on control levers or
other protruding parts.
If you have long hair and it hangs out from your hard
hat, there is a hazard that it may get caught up in
the machine, so tie your hair up and be careful not
to let it get caught.
Always wear a hard hat and safety shoes. If the
nature of the work requires it, wear safety glasses,
mask, gloves, ear plugs, and safety belt when
operating or maintaining the machine.
Check that all protective equipment functions properly before using it.
Fire Extinguisher and First Aid Kit
Always follow the precautions below to prepare for action
if any injury or fire should occur.
Be sure that fire extinguishers have been provided
and ensure that you know their use well in
emergencies.
Carry out periodic inspection and maintenance to
ensure that the fire extinguisher can always be used.
Provide a first aid kit in the storage point. Carry out
periodic checks and add to the contents if
necessary.
Safety Equipment
Be sure that all guards, covers and rear view mirror are in their proper position. Have guards
and covers repaired immediately if they are damaged.
Understand the method of use of safety features and use them properly.
Never remove any safety features. Always keep them in good operating condition.
To Next Page
Loading...