OPERATION & MAINTENANCE MANUAL STE35SR
Safety Regulations
To operate and use the machine, you must follow the rules and regulations issued by national,
provincial, autonomous region, and government. Therefore, the operating instructions and safety
information contained in this manual are merely some helpful advice.
The following symbols together with texts mean the following as they appear in this manual:
Warning, keep alert! It concerns your own safety!
Ignorance of such risk may result in accident, serious injury even death.
It’s the operator’s liability to ensure that all warning signs are kept on the machine in good
condition and legibly. Otherwise accident is most likely to occur.
Familiarize with the functions and limitations of the machine.
In addition to the above, the following signal words are used to indicate precautions that should be
followed to protect the machine or to give information that is useful to know.
NOTICE This word Indicates that when the wrong operation is carried out, it may cause
damage to the machine or shorten the service life of the machine.
REMARKS This word is used for information that is useful to know.
Vehicle Operation and Maintenance
CFG industrial ltd. will provide warranty services only in the following cases:
The machine is used and maintained according to this manual.
Service and maintenance of components are handled with the time.
Lubricants and fuel are used according to this manual.
None of protection seals installed is damaged or some protection seals have been adjusted
or re-installed by authorized dealers.
All changes and maintenance works as well as the methods used are among those specified
by CFG industrial ltd.
Only the genuine parts or accessories of CFG industrial ltd. or the parts or accessories
approved by the company are used.
Before operating the machine, the operator must have sufficient operational skills and have
read up and understood the related content of the manual.
Untrained operators may result in the risk of serious injury or personal death.
Never use a machine without the Operator’s Manual.
Before operating this machine, familiarize with various warning signs, symbols and the
operator’s manual of this vehicle.
Installation of Communication Equipment
NOTICE
All optional electronic communication equipment must be installed by specially trained personnel
in accordance with the requirements of CFG industrial ltd. specific to this machine.
Protection of Electromagnetic interference
The machine has been tested in accordance with EU89/336 EC instructions on electromagnetic
interference, so it is very important that all unauthorized electronic accessories, such as
communication equipment, should be tested before and after installation, because they may cause
electromagnetic interference to the electronic system on the machine.
To Next Page
Loading...