OPERATION & MAINTENANCE MANUAL STE35SR
General Operation Information
Traveling
When walking on obstacles (such as gravel, tree stumps), the machine (especially the lower
walking device) will withstand a great impact, resulting in damage to the machine. Therefore, such
obstacles should be removed as much as possible and avoid walking on obstacles. As a last
resort, reduce the walking speed, keep the working device close to the ground, and make the
center of the crawler cross over obstacles.
Avoid Blade Impacted
Do not given impact by some stones or road
shoulder, this will premature damage the blade or
hydraulic cylinders.
Fold the Work Equipment
Be careful not to allow the bucket to impact the
blade when the work equipment is folded in
traveling or transport attitude.
Blade in Backhoe Operation
When the excavator is in deep excavation while the
blade is at the front, be careful not to impact the
blade with the boom cylinder. In addition to the
blade must be in the front, insure put the blade
placed in the rear.
To Next Page
Loading...