OPERATION & MAINTENANCE MANUAL STE35SR
Moving Machine Backward
1. Raise the safety lock lever, put away the
working device and lift it 40-50cm from the
ground.
2. Pull the dozer lever backward to raise the
dozer.
3. Operate the travel levers as follows:
When sprocket
○
A is at the rear of the
machine:
Slowly pull the joystick back to move the
machine.
When sprocket
○
A is at the front of the
machine:
Slowly push the joystick forward to move the
machine.
4. The walking speed switching mode is consistent with the "speed forward" method.
Stopping Machine
Avoid stopping suddenly. Give yourself ample room
when stopping.
1. Put the left and right travel levers in the neutral
position, then stop the machine.
To Next Page
Loading...