OPERATION & MAINTENANCE MANUAL STE35SR
Swinging
Before operating the swing, check that the area around the machine is safe.
REMARK
When swinging on the ramp, you should operate the engine at a low speed and operate the
swing control lever at a micro operation
Especially in the bucket load state, should avoid sudden operation.
When the bucket is on load, the brake of the parking brake can be released by operating the
left work equipment control lever. There will be an instant return, but this is not unusual.
Work Equipment Controls and Operations
This operation is only for the standard operation mode (ISO mode). For other operation modes,
please contact your dealer.
Use the control levers to operate the work equipment
When the levers are released, they return to the
middle position and the work equipment is held in
that position.
Arm operation
Operate the left control lever forward (1) or
backward (2) to control the arm.
Swing operation
Operate the left control lever to the left (3) or right
(4) to swing the upper structure.
Boom operation
Operate the right control lever forward (1) or
backward (2) to operate the boom.
To Next Page
Loading...