OPERATION & MAINTENANCE MANUAL STE35SR
Turn off the Engine before Checking and Maintenance
Park the machine on firm, level ground.
Select a place where there is no hazard of
falling rocks or landslides, or of flooding if the
land is low.
Lower the work equipment and Bulldozer
completely to the ground.
Check that the battery relay is off and main
power is not conducted. (Wait for approx one
minute after turning off the engine starting
switch key and press the horn switch. If the
horn does not sound, it is not activated.)
Push up the work equipment control lever to middle position and push up lock lever to the
LOCK position, then turn off the engine.
Put blocks under the track to prevent the
machine from moving.
To Next Page
Loading...