OPERATION & MAINTENANCE MANUAL STE35SR
Two workers for maintenance when engine is
running
To prevent injury, do not carry out maintenance with
the engine running. If maintenance must be carried
out with the engine running, carry out the operation
with at least two workers and do as follows.
One worker must always sit in the operator's
seat and be ready to stop the engine at any time.
All workers must maintain contact with the other
workers.
Set lock lever to the LOCK position.
When carrying out operations near the fan, fan
belt, or other rotating parts, there is a hazard of
being caught in the parts, so be careful not to
come close.
Do not touch any control levers. If any control
lever must be operated, give a signal to the
other workers to warn them to move to a safe
place.
Never drop or insert tools or other objects into
the fan or fan belt. Parts may break or be sent
flying.
Proper tools
Use only tools suited to the task and be sure to use
the tools correctly. Using damaged, low quality, faulty,
makeshift tools or improper use of the tools could
cause serious personal injury.
Personnel
Only authorized personnel can service and repair the machine. Do not allow unauthorized
personnel into the area. If necessary, employ an observer.
Attachment
Appoint a leader before starting removal or
installation operations for attachments.
Place attachments that have been removed
from the machine in a stable condition so that
they do not fall. And take steps to prevent
unauthorized persons from entering the storage
area.
To Next Page
Loading...