OPERATION & MAINTENANCE MANUAL STE35SR
1. Pilot Switch Indication
According to the machine pilot safety lock state for the corresponding indications, display
when pilot lock is pulled up and when pilot lock is lowered.
2. Preheating Signal Indication
According to the machine preheating state for corresponding instructions, is displayed when
the machine is in preheating, and the icon is not displayed when it is not in preheating.
3. Air Conditioning System Switch
Operate the machine air conditioning system switch according to the demand and give
corresponding instructions, is displayed when the air conditioning system is on and is
displayed when it is off .
4. Air Filter Blocking Alarm
Give corresponding instructions according to the alarm state of air filter blockage, when the air
filter is blocked , is displayed, when no air filter is blocked, the icon is not displayed.
5. Charge Alarm
Give corresponding instructions according to the charging alarm state, is displayed when
there is a charging alarm, and the icon is not displayed when there is no charging alarm.
6. Oil Pressure Alarm
According to the oil pressure alarm state for corresponding instructions, is displayed
when there is oil pressure alarm, and the icon is not displayed when there is no oil pressure alarm.
7. Beijing Time And Date Display
According to the set local Beijing time, display the information of the year, month and day.
8. Beijing Time Display
According to the set local Beijing time, displays the time, minute and second information.
9. Cooling Temperature Indication
According to the machine current cooling water temperature indication, can set the display range
of 35℃-140℃.
10. Fuel Level Indication
According to the machine current fuel level percentage indication, can set the display range of
0%-100%.
11. Engine Speed Indication
According to the machine current engine speed indication, can set the display range of
0rpm-3000rpm.
12. Battery Voltage Indication
According to the machine current battery voltage value indication, accurate to 0.1V.
13. Working Hour Indication
When the machine starts the timing, icon changes dynamically, and icon remains
unchanged after the timing stops.
To Next Page
Loading...