UConnect™ Hard-Key
When you press the UConnect™ hard-key you will hear
the word UConnect™ followed by a BEEP. The beep is
your signal to give a command.
NOTE: If nothing is said within a few seconds, the
system will present a list of menu options.
Listen to the choices and give your command after the
beep.
Barge In – Overriding Prompts
The ‘Voice Recognition’ button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is playing “Would you like to pair a phone, clear
a…,” you could press the ‘VR hard-key and say “Pair a
Phone” to select that option without having to listen to
the rest of the voice prompt.
Pressing the VR hard-key while the system is speaking is
known as “barging-in”. Barging-in must be done with the
VR hard-key.
Help Command
If you need assistance at any prompt or if you want to
know what your options are at any prompt, say “Help”
following the beep. The UConnect™ system will play all
the options at any prompt if you ask for help.
To activate the UConnect™ system from idle, simply
press the UConnect™ hard-key and follow audible
prompts for directions. All UConnect™ system sessions
begin with a press of the UConnect™ hard-key.
Cancel Command
At any prompt, after the beep, you can say “Cancel” to go
out of UConnect™ mode.
NAVIGATION 101
1
To Next Page
Loading...
