103
Chapter 6 Startup
6.4 DATA FIELD PROPERTIES
6.4.1 NUMBER OF DELIMITER
The input data will be saved as transaction records. Specify the delimiters used to
separate data fields, either in ASCII code or text. It allows using up to two different
delimiters. Type the ASCII code for a delimiter and its corresponding character will be
shown automatically, and vice versa.
6.4.2 BROWSE DATA FONT SIZE
You may select to use small/large font for data browsing when the Font File item is set
to single-byte languages.
Note: This selection is not available for 8500 model.
6.4.3 DAT FILE LOCATION
You may specify the location to store the DAT files. The options are as follows:
SRAM
SD Card
Note: This selection is not available for 8000/8300/8500 models.
6.5 REDEFINE PROMPTS & MESSAGES
For non-English environment, all the prompts and messages need to be re-defined in
your local language. In addition, the appropriate font file has to be downloaded to the
mobile computer so that it can display the prompts and messages correctly. Refer to
Localization.
6.6 IMPORT PROMPTS & MESSAGES
If the prompts and messages have already been re-defined with an existing template file,
simply click this button to import the template file.
6.7 RESET PROMPTS & MESSAGES TO DEFAULT
Click this button to load the default prompts and messages settings.
Note: The current settings will be cleared.
To Next Page
Loading...
Need help?
General
