24
FORGE Batch Application Generator User Guide
AGX TEMPLATE CONVERSION
This command converts the currently edited template file to a template for another
8-series model. Select File | Convert to 8xxx from the menu bar of the Batch AG to
achieve the conversion.
The template conversion involves the change of these 2 elements of a template:
The changes of upload/download interface.
The changes of the prompts & messages.
The following table gives an account of the upload/download interface conversion
between 8-series models. The table only lists models when the target device doesn’t
have the same upload/download interface as the original one.
To Next Page
Loading...
