CipherLab 8000 User Manual

82
FORGE Batch Application Generator User Guide
3.8.3 SKIP THE RECORD
When “Skip the record” is selected, if a lookup file of wrong format is set in, the
application template first displays a message on the mobile computer to indicate the
mismatching part discarded. Then you may need to reload the lookup file after the data
format has been corrected.
Fixed Length
Conditions Action
Record length in the source lookup file is more than that specified in .AGX Skip
Record length in the source lookup file is less than that specified in .AGX Skip
Delimiter
Conditions Action
The number of fields in the source lookup file is more than that specified
in .AGX
Skip
The number of fields in the source lookup file is less than that specified
in .AGX
Skip
The field length in the source lookup file is more than that specified
in .AGX
Skip
The field length in the source lookup file is less than that specified
in .AGX
Allow download
Note
Note: That specific field will be padded with additional blank space.
3.9 RESET CURRENT LOOKUP FILE
Click the “Reset Current Lookup File” button to load the default settings.
Note: The settings for the current lookup file will be cleared.

CipherLab 8000 Specifications

General

Operating System	Proprietary
Humidity	5% to 95% non-condensing
Barcode Scanner	Laser
Connectivity	RS-232
Ports	RS-232
Weight (Extended)	280g (with battery)
Storage Temperature	-20°C to 60°C
Drop Specification	1.2m