CipherLab 8000 User Manual

148
FORGE Batch Application Generator User Guide
Enable UPC-E1 Triple
Check
Decide whether to apply read redundancy to the UPC-E1
barcode.
 When applied, the same UPC-E1 barcode has to be
read three times to make a valid reading. This is
helpful when the barcode is defaced and requires more
attempts to read it successfully.
No
Addon 2 / Addon 5 Decide whether to decode UPC-E with addons. No
GS1 Formatting ---
GS1-128 (EAN128) Decide whether to enable GS1 formatting for GS1-128. Disable
GS1 DataBar Family Decide whether to enable GS1 formatting for GS1 DataBar
Family.
Disable
Field Separator Specify the field separator. No
Application ID Mark Specify the application ID mark character. No

CipherLab 8000 Specifications

General

Operating System	Proprietary
Humidity	5% to 95% non-condensing
Barcode Scanner	Laser
Connectivity	RS-232
Ports	RS-232
Weight (Extended)	280g (with battery)
Storage Temperature	-20°C to 60°C
Drop Specification	1.2m