CipherLab 8000 User Manual

152
FORGE Batch Application Generator User Guide
Matrix 25 Disable
Verify Check Digit Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
No
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
No
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
Any Length
Chinese 25 Disable
Note: Matrix 25 and Chinese 25 are supported on 2D scan engine for
8200/8400/8600/8700.
Code 39 Enable
Convert to Code 32 Convert to Italian Pharmacode. No
Verify Check Digit Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
No
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
 "Verify Check Digit" must be enabled so that the check
digit can be left out (= "Transmit Check Digit"
disabled).
No
Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and
special characters.
Disable
Trioptic Code 39 Decide whether to decode Trioptic Code 39.
 Trioptic Code 39 is a variant of Code 39 used in the
marking of computer tape cartridges. It always
contains six characters.
Disable
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
Any Length
Code 93 Enable
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
Any Length
MSI Disable
Verify Check Digit If Two Check Digits option is selected, an additional
verification is required to ensure integrity. Select one of
the algorithms below. If the check digit is incorrect, the
barcode will not be accepted.
Single Modulo
10

CipherLab 8000 Specifications

General

Operating System	Proprietary
Humidity	5% to 95% non-condensing
Barcode Scanner	Laser
Connectivity	RS-232
Ports	RS-232
Weight (Extended)	280g (with battery)
Storage Temperature	-20°C to 60°C
Drop Specification	1.2m