213
Appendix II Lase
(SE955)
Length option Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Interleaved 25
Interleaved 25 Checkbox to enable Interleaved 2 of 5 decoding. Enable
Length option Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Verify Check Digit Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS Check Digit
OPCC Check Digit
Disable
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
Disable
Convert To EAN-13 Convert a 14-character Interleaved 25 barcode into EAN-13
if the following requirements are met:
The barcode must have a leading 0 and a valid EAN-13 check
digit.
Disable
GS1 DATABAR
GS1 DataBar-14
Enable GS1 DataBar-14
Checkbox to enable GS1 DataBar-14 decoding. Enable
GS1 DataBar Limited
Enable GS1 DataBar
Limited
Checkbox to enable GS1 DataBar Limited decoding. Enable
GS1 DataBar Expanded
Enable GS1 DataBar
Expanded
Checkbox to enable GS1 DataBar Expanded decoding. Enable
Convert to UPC/EAN