222
9700 Mobile Computer (CE) Reference Manual
Support Full ASCII Selects whether to enable Code 39 Full ASCII decoding.
Characters are paired to encode the full ASCII character set.
Disable
Length option Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
CODE 93
Code 93
Enable Code 93 Checkbox to enable Code 93 decoding. Enable
Length option Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
CODE 128
Code 128
Enable Code 128 Checkbox to enable Code 128 decoding. Enable
ISBT 128
Enable ISBT 128 Checkbox to enable ISBT 128 decoding. Enable
GS1-128
Enable GS1-128 Checkbox to enable GS1-128 decoding. Enable
CODE 2 OF 5
Discrete 25
Discrete 25 Checkbox to enable Discrete 25 decoding. Enable
Length option Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Interleaved 25
Interleaved 25 Checkbox to enable Interleaved 2 of 5 decoding. Enable
Length option Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Verify Check Digit Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS Check Digit
OPCC Check Digit
Disable