62
9700 Mobile Computer (CE) Reference Manual
HOW TO OUTPUT
After the output destination is set, configure how to output decoded data, i.e. the “format”
to present decoded data.
Setting
Description Default
Auto Enter Adds an ENTER character before or after each scanning act.
This function saves the trouble pressing [Enter] key to
confirm each scan. Options are:
Disable
Decoded data + Enter
Enter + Decoded data
Decoded
data +
Enter
Auto Enter character Adds a key code before or after the decoded data. This
setting is available only when [Auto Enter] is enabled.
Options are:
None
Carriage Return
Tab
Space
Comma
Semicolon
Carriage
Return
Display Code Type Prefixes the output data with code type information. Deselected
(Disabled)
Show Code Length Suffixes the output data with code length information. Deselected
(Disabled)
Prefix Affixes 0 to 10 characters to the left of the output data. Tap
the keyboard icon
next to the input field to open a
character table for entering the prefix.
Prefixes containing invisible characters are supported.
--
Suffix Affixes 0 to 10 characters to the right of the output data. Tap
the keyboard icon
next to the input field to open a
character table for entering the suffix.
Suffixes containing invisible characters are supported.
--
Field Delimiter Sets the delimiter to separate the output barcode data to the
following pieces: code type, decoded barcode data, and code
length (if applicable). Options are:
Comma
Semicolon
Full stop
Comma
ENABLE READER
Features a checkbox to enable or disable reader scanning ability. When enabled, light beam
will be sent out each time the trigger (scan key) is pressed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
