5-23
Cisco 1240 Connected Grid Router Hardware Installation Guide
OL-26223-04
Chapter 5 Mounting the Router
Mounting Instructions
Wall-Mount Location
Identify an area on a wall that meets the safety, space, and environmental requirements described in the
“Site Requirements” section on page 2-3.
Wall-Mount Height
The router should be mounted at a height at which you are able to view the top of the module-side panel
and at which the cables are able to be managed without adding stress to the router ports.
Wall-Mount Hardware Distance
Any reinforcement hardware you provide should be mounted to the wall with the correct distance apart
so when the bolts are installed through the mounting bracket wall mount holes (Item 1, Figure 5-20),
they will align with the holes in the wall.
Figure 5-20 Distance for Wall-Mounting Hardware
To Next Page
Loading...
