Cisco 7906G

CHAPTER 10
Troubleshooting
•
Problems, page 87
•
Phone Troubleshooting Data, page 90
•
Quality Reporting Tool, page 90
Problems
This section provides information to help you troubleshoot general problems with your phone. For more
information, see your system administrator.
No Dial Tone or Cannot Complete Call
Problem
You cannot hear a dial tone or complete a call.
Cause
One or more of the following factors might apply:
•
You are not connected to Extension Mobility service.
•
The system requires a Client Matter Code (CMC) or Forced Authorization Code (FAC) after dialing a
number. (SCCP phones only.)
•
Your phone has time-of-day restrictions that prevent you from using some features during certain hours
of the day.
Solution
Try the following:
•
Log into the Extension Mobility service.
•
Enter a CMC or FAC after dialing a number. (SCCP phones only.)
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
87