Cisco 7906G User Manual

Initiate Conference Call on Call Picked Up on Mobile Phone
Procedure
Step 1
Press Enterprise Conference (name may vary) your mobile phone.
Step 2
Dial your enterprise access code for conferencing to initiate a new call. The other party is placed on hold.
Step 3
Press Enterprise Conference to complete the conference set-up and include both callers in the conference.
Connect to Mobile Voice Access
Procedure
Step 1
From any phone, dial your assigned Mobile Voice Access number.
Step 2
Enter the number you are calling from, if prompted, and your PIN.
Turn On Mobile Connect from Mobile Phone
Procedure
Step 1
Dial your assigned Mobile Voice access number.
Step 2
Enter your mobile phone number (if requested) and PIN.
Step 3
Press 2 to enable Mobile Connect.
Step 4
Choose whether to turn Mobile Connect on for all configured phones or just one:
•
All phones: Enter 2.
•
One phone: Enter 1 and enter the number you want to add as a remote destination, followed by pound
(#).
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
45
Calling Features
Business Calls Using Single Phone Number

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English