Cisco 7906G User Manual

Change Audible Voice Message Indicator Setting Per Line
Procedure
Step 1
Choose User Options > Device.
Step 2
Choose a phone from the Name drop-down menu.
Step 3
Click Line Settings.
Step 4
(optional) If you have more than one directory number (line) assigned to your phone, choose a line from the
Line drop-down menu.
Step 5
In the Audible Message Waiting Indicator area, choose from various settings.
Typically, the default message waiting setting prompts your phone to display a steady red light from
the handset light strip to indicate a new voice message.
Note
Step 6
Click Save.
Change or Create Line Text Label that Appears on Phone Screen
Procedure
Step 1
Choose User Options > Device.
Step 2
Choose a phone from the Name drop-down menu.
Step 3
Click Line Settings.
Step 4
(optional) If you have more than one directory number (line) assigned to your phone, choose a line from the
Line drop-down menu.
Step 5
In the Line Text Label area, enter a text label.
Step 6
Click Save.
Your phone uses the ASCII Label field if the phone does not support double-byte character
sets.
Note
Phone and Access List Set Up for Mobile Connect
You must add your mobile phone (and any other phones you use) to Cisco Mobile Connect, before you can
place and receive calls using the same directory numbers as your desk phone. These phones are called remote
destinations. You can also define access lists to restrict or allow calls from certain numbers to be sent to your
mobile phone.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
80
User Options Web Pages
Phone and Access List Set Up for Mobile Connect

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English