DescriptionItem
The light strip on the handset indicates an incoming call or new
voice message.
Handset with light strip9
Allows the phone to stand at a convenient angle on a desk or
table.
Footstand10
Line and Call Definitions
The terms lines and calls can be easily confused, refer to these descriptions:
• Lines—Each line corresponds to a phone number (or extension) that others can use to call you. Your
phone can support one line.
• Calls—Each line can support multiple calls. By default, your phone supports up to six connected calls,
but your system administrator can adjust this number according to your needs. Only one call can be
active at any time; other calls are automatically placed on hold.
Line and Call Icons
Your phone displays icons to help you determine the call and line state (on-hook, on hold, ringing, connected,
and so on).
DescriptionCall or line stateIcon
No call activity on this line.On-hook line
You are dialing a number or an outgoing call is ringing.Off-hook line
You are connected to the other party.Connected call
A call is ringing on your line.Ringing call
You have put this call on hold. See Hold and Resume, on page 20.Call on hold
Another phone that shares your line has put a call on hold. See Hold
and Resume, on page 20.
Remote call on hold
Another phone that shares your line has a connected call. See Shared
Lines, on page 36.
Remote-in-use
A holding call is reverting to your phone. See Hold and Resume, on
page 20.
Reverting call
See Secure Calls, on page 38.Authenticated call
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
3
Features of Your Cisco Unified IP Phone
Line and Call Definitions
To Next Page
Loading...
Need help?
General
