Tips
•
EM automatically logs you out after a certain amount of time. Your system administrator establishes
this time limit.
•
Changes that you make to your EM profile from your Cisco Unified Communications Manager User
Options web pages take effect immediately if you are logged in to EM on the phone; otherwise, changes
take effect the next time you log in.
•
Changes that you make to the phone from your User Options web pages take effect immediately if you
are logged out of EM; otherwise, changes take effect after you log out.
•
Local settings controlled by the phone are not maintained in your EM profile.
Log In to EM
Procedure
Step 1
Press and choose Services > EM Service (name can vary).
Step 2
Enter your user ID and PIN (provided by your system administrator).
Step 3
If prompted, select a device profile.
Log Out of EM
Procedure
Step 1
Press and choose Services > EM Service (name can vary).
Step 2
When prompted to log out, press Yes.
Change PIN Using Change Credentials Service
Procedure
Step 1
Press and choose Services > Change Credentials.
Step 2
Enter your User ID in the User ID field.
Step 3
Enter your PIN in the Current PIN field.
Step 4
Enter your new PIN in the New PIN field.
Step 5
Enter your new PIN again in the Confirm PIN field.
Step 6
Press Change.
You will see a PIN Change Successful message.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
42
Calling Features
Cisco Extension Mobility
To Next Page
Loading...
Need help?
General
