When DND and Call Forward are enabled on your phone, calls forwards immediately and the caller does not
hear a busy tone.
DND interaction with other types of calls includes:
•
DND does not affect intercom calls or nonintercom priority calls.
•
If both DND and AutoAnswer are enabled, only intercom calls autoanswer.
•
When you switch an in-progress call from your mobile phone to Cisco Unified phones that share the
same line (Session Handoff), the phone disables the DND feature. The DND feature returns when the
call ends.
Turn DND On and Off
Procedure
Step 1
To turn DND on, press DND.
“Do Not Disturb” displays on the status line, and the ring tone is turned off.
Step 2
To turn DND off, press DND.
Turn DND Off from Call Preferences
Procedure
Step 1
Press > Device Configuration > Call Preferences > Do Not Disturb.
Step 2
Select No, and then press Save.
Set Up DND Settings
If your system administrator configured DND settings to appear on the User Options page, perform these
steps:
Procedure
Step 1
Log in to your User Options web pages.
Step 2
From the drop-down menu, choose User Options > Device.
Step 3
You can set the following options:
•
Do Not Disturb: Set to enable/disable DND.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
26
Calling Features
Turn DND On and Off