Cisco 7906G User Manual

Switch In-Progress Call from Desk Phone to Mobile Phone
Procedure
Step 1
Press the Mobility softkey and select Send call to mobile.
Step 2
Answer the in-progress call on your mobile phone.
Switch In-Progress Call from Mobile Phone to Desk Phone
Procedure
Step 1
Hang up the call on your mobile phone to disconnect the mobile phone, but not the call.
Step 2
Press Answer softkey on your desk phone within 4 seconds and start talking on the desk phone.
Switch In-Progress Call from Mobile Phone to Desk Phone Sharing Same Line
(Session Handoff)
Procedure
Step 1
While on your mobile phone, enter the access code for the Session Handoff feature (for example, *74). Contact
your system administrator for a list of access codes.
Step 2
Hang up the call on your mobile phone to disconnect the mobile phone but not the call.
Step 3
Press Answer on your desk phone within 10 seconds and start talking on the desk phone. Your system
administrator sets the maximum number of seconds you have to answer the call on your desk phone.
The other Cisco Unified devices that share the same line display a Remote in Use message.
Call Transfer
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Tips
•
If on-hook transfer is enabled on your phone, you can either hang up to complete the call, or press
Transfer and then hang up.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
22
Calling Features
Switch In-Progress Call from Desk Phone to Mobile Phone

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English