You can park a call by using these methods:
•
Call Park: Use Park to store the call. Your phone displays the call park number where the system stored
your call. You must record this number and then use the same number to retrieve the call.
•
Directed Call Park: Use Transfer to direct the call to an available directed call park number that you
dial or speed dial. To retrieve the call from a directed call park number, you must dial the park retrieval
prefix and then dial or speed dial the same directed call park number.
Tip
You have a limited time to retrieve a parked call before it reverts to ringing at the original number. Contact
your system administrator for details.
Store and Retrieve Active Call Using Call Park
Procedure
Step 1
During a call, press Park. You may need to press more to see Park.
Step 2
Record the call park number displayed on your phone screen.
Step 3
Hang up.
Step 4
To pick up the parked call, enter the call park number from any Cisco Unified IP Phone in your network.
Direct and Store Active Call at Directed Call Park Number
Procedure
Step 1
During a call, press Transfer.
Step 2
Select a speed-dial number assigned to a directed call park number or dial the number.
Step 3
Press Transfer again to finish storing the call.
Retrieve Parked Call from Directed Call Park Number
Procedure
From any Cisco Unified IP Phone in your network, use one of the following methods
a) Enter the park retrieval prefix and dial the directed call park number.
b) Enter the park retrieval prefix, select the speed-dial for the directed call park number to connect to the
call.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
35
Calling Features
Call Park
To Next Page
Loading...
Need help?
General
