Cisco 7906G

Dial from Call Log While Not On Another Call
Procedure
Step 1
Press and choose Directories.
Step 2
Select one of the following entries:
•
Missed Calls
•
Placed Calls
•
Received Calls
Step 3
Highlight a call record from the log.
If the Details softkey appears, the call is the primary entry of a multiparty call.
Step 4
If you need to edit the displayed number, press EditDial followed by << or >>.
Step 5
To delete the number, press followed by Delete. You may EditDial need to press more to display Delete.
Step 6
To place the call, go off hook.
Dial from Call Log While Connected to Another Call
Procedure
Step 1
Press , and choose Directories.
Step 2
Select one of the following entries:
•
Missed Calls
•
Placed Calls
•
Received Calls
Step 3
Highlight a call record from the log.
If the Details softkey displays, the call is the primary entry of a multiparty call.
Step 4
If you need to edit the displayed number, press EditDial followed by << or >>.
Step 5
To delete the number, press EditDial followed by Delete. You may need to press the more softkey to display
Delete.
Step 6
Press Dial.
Step 7
Choose one of the following to handle the original call:
•
Hold: Puts the first call on hold.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
58
Call Logs and Directories
Dial from Call Log While Not On Another Call